All Posts

Pain Points of WWTP Upgrades - The Energy Challenge

 

Wastewater Treatment and the 

Water Energy Nexus

Increasing populations, industrial growth and tightening environmental standards are pushing wastewater treatment plants (WWTPs) close to and often beyond their design limits. Many of the world's existing wastewater treatment plants need upgrading; due to treatment capacity issues or regulatory targets, where upgrading is not a choice but a necessity for compliance. These existing treatment plants can face several challenges when it comes to upgrading

 

In this "Pain" series we will look at some of the critical challenges wastewater treatment plants face when it comes to upgrading their facilities. 

 

Challenge 3:  The Energy Challenge

 

The increasing cost of energy can be a challenge when it comes to operating wastewater treatment plants. With increasing regulations and carbon footprint goals, many of today's wastewater plants are having to upgrade their systems.

 

One of the main challenges facing treatment plant operators is that traditional expansion solutions result in more energy being required as more equipment means more power. This can be a detriment for companies who have carbon footprint goals as it moves them further away from their commitments.

On a global scale, conventional wastewater treatment typically consumes
2-3% of the total national electricity production.

In the last 30-40 years, it is evident that the energy costs represent a severe drawback when using systems such as MBBR, IFAS, and RBC at any scale. To improve reaction rates, they combine mechanical mixing and bubble aeration. 

Biological wastewater treatment consumes 50 – 80 % of an entire plant's power supply. Energy efficiency thus depends predominantly on plant design. Typically, with bubble aeration, less than 30 percent of the oxygen supplied by diffusers is transferred to the wastewater, resulting in enormous energy waste. More and more end-users are considering TOTEX over CAPEX as upgraded plants will operate for more than 20 years.

Now an alternative solution to traditional upgrades is available. One that requires significantly less energy.

 

_MG_5777

OxyMem is not like other solutions. OxyMem MABR is a fixed-film technology that doesn't use conventional aeration to move, treat and discharge water.

OxyMem MABR is much more efficient as the driving force for the transfer of oxygen across the membrane is diffusion and not pressure. This is one of the key features of the OxyMem MABR system because it means the air blower does not have to overcome the hydrostatic head and thus can be operated at low pressures which saves energy.

Our patented, bubble-less transfer of oxygen, designed to emulate a natural respiratory system, gives simultaneous nitrification and denitrification for total nitrogen removal, energy savings up to 75%, reduces sludge by up to 50% and decreases your plant carbon footprintwith no additional infrastructure needed.

The results are considerable OPEX saving over other upgrade solutions for the life of the plant.

 

 

Contact us today if you would like to discuss how OxyMem MABR can help you overcome your plant challanges.

Contact Us 

 

If you missed our first article of the series read it here: The Land Challenge

If you missed our second article of the series read it here: The Time Challenge

Sandra Murray
Sandra Murray
Marketing Executive

Subscribe to stay informed

*Environment  *Legislation  *Socio-economics  *Technology

Related Posts

Anglian Water (UK) Triple Carbon Reduction Project

Triple Carbon Reduction, Anglian Water, UK Supported by UK Water Services Regulation Authority, Ofwat We are proud to join Anglian Water Services and an extensive team of partnering companies and academia on the current Triple Carbon Reduction initiative, part of Ofwat's Water Breakthrough Challenge. OxyMem™The Triple Carbon Reduction project is an initiative that will demonstrate how MABR can help the sector minimise process emissions and energy consumption typically associated with municipal biological wastewater treatment. The Triple Carbon Reduction project aims to showcase an integrated solution addressing three potential carbon benefits, aligned with the objectives of the whole water industry to achieve Net Zero by 2030: Demonstrate a viable alternative wastewater treatment process (MABR - Membrane Aerated Biofilm Reactor) targeting elimination of nitrous oxide (N2O) emissions from secondary treatment; Achieve up to 85% reduction in energy consumption compared to conventional treatment processes currently in use (i.e. “activated sludge”); Generate oxygen via electrolysis, to be utilised in the MABR process, and green hydrogen for use in applications that are currently challenging to decarbonise (i.e. diesel generators).

OxyMem MABR Enhanced ammonia removal

Enhanced WWTP nitrification with OxyMem™ MABR Faster, stronger, harder… OxyMem™ MABR (Membrane Aerated Biofilm Reactor) is a unique biofilm system that can be used to intensify existing wastewater treatment facilities. A microbial film is established on millions of tiny gas-permeable membranes. This biofilm breaks down wastewater pollutants effectively with highly efficient oxygen transfer. Ammonia removal can be enhanced with every additional OxyMem™ unit added.

How to cut emissions from wastewater?

How to cut emissions from wastewater? On the 21st of September we not only celebrate Zero Emissions Day, but also we are asked to curb our emissions for 24 hours whenever it's possible.